Spiral juicer machine is used for tomatoes, pineapples, carrots, apples, aloe vera, cactus and other fruit and vegetable crushing juice. Driven by the screw shaft extrusion, with crushing, juice, slagging function.
 
The spindle is composed of the front bearing, the hopper, the screw shaft, the filter, the juice collector, the rear bearing, the slag groove and so on. The left end of the spiral spindle is supported in the rolling bearing seat, the right end is supported in the hand wheel bearing seat, The motor is operated by a pair of pulleys to drive the screw shaft.
 
The screw shaft rotates clockwise along the exit direction of the slag, and the bottom diameter gradually increases and the pitch gradually decreases. When the material is advanced by the screw shaft, the spiral cavity is gradually reduced to form the press of the material.
 
The fruit and vegetable products are added to the hopper, and the squeezed juice flows into the bottom of the juice through the filter under the advance and the squeeze of the screw shaft, and the slag is formed by the ring formed between the screw shaft and the tapered portion of the regulating head Shaped gap discharge, adjust the size of the gap can be adjusted to adjust the slag resistance, you can change the slag rate, the size of the pressure head should be treated as the size of the processed fruit and vegetable products may be.